Project of a house measuring 8x10 m: successful layout options

An example of a layout of a comfortable home measuring 8 by 10.

With the same size of the building spot and number of storeys of the building, the internal layout can vary significantly. The layout of the 8x10 house is selected taking into account the number of people who will constantly live in it, as well as the needs of the future owner.

Layout of a two-story house 10 × 8

The layout of the house 8 by 10 gives much more room for imagination and placement of premises in the building than the layout of small summer houses 6x6 or 6x9.

Depending on the purpose of the house and the method of use, the entire area can be divided into many small but isolated rooms, or vice versa, to preserve the maximum open space. Based on these data, the need to equip a large kitchen, the number of bathrooms and utility rooms is also determined.

Typical layout of a one-story house 8x10

First you need to decide where your future cottage will be located on a summer cottage. The location of the windows and the particular layout of some rooms depend on this.

Next, you should think about how many people will permanently live in your house, the number of bedrooms and bathrooms will depend on this.

Layout example of a one-storey country house 8x10

It is clear that the layout of the 8x10 house does not expect that fifteen people will live in it.
The layout of a one-story house should provide that the windows of the bedrooms face the east or southeast side, the living room and the nursery are south or southeast, and the common rooms are west. This arrangement will favorably affect the air exchange of the premises.

How carefully you think through the layout and placement of rooms in your house, how comfortable and relaxed you will feel in it.

Country house 8x10

A house that will be used as a temporary home, for example, in a summer cottage, allows for an open plan even if there is only one floor. This means that there will be a minimum of partitions and a maximum of free space inside. In this case, all necessary premises will be saved.

Detailed layout of a country house 8x10 in size

Almost 80 square meters of area corresponds to the size of a four-room apartment. But the project of a country house with a perimeter of 8x10 implies a different philosophy of the location of the premises.

The private house directly communicates with the street; it does not have a heated entrance and separate isolated corridors.

To protect your home from the penetration of cold inside, when the front door opens, be sure to equip the vestibule.

In some projects, it may not be available if the porch is combined with a covered and glazed veranda.

Considerable attention in the house is given to the living room. The country house is intended for relaxation, the whole family gathers here, friends and relatives come. So, the living room should be very spacious and comfortable.

It is central to the layout of the house. To achieve a sense of freedom and space, indoors, they refuse from extra partitions. In this case, the living room is combined with the kitchen.

The layout of the house 10 × 8 with combined kitchen and living room

The room becomes larger in area, and for convenience it is visually divided into functional zones.
House 8x10 must necessarily contain a bedroom. Their number should correspond to the number of regular visitors. It is also nice to provide one or two guest rooms.

Given that the house is not used for permanent residence, but for temporary, the bedrooms can be divided not according to the number of people, but according to functionality: the parent bedroom and children's bedrooms. It is also possible to separate the bedrooms by gender: for boys and for girls. This is especially true for large families.

The project of the house provides for the availability of bathrooms. For such an area, one room will be enough. It can be both separate and combined rooms. Instead of a bath, you can install a shower cabin - it will take up less space and in these conditions will be more in demand.

The project of the house 8 × 10 with a detailed layout

Additionally, the plan of the country house 8x10 should include utility rooms: pantry, dressing room, utility room. If the house provides boiler heating, then a separate room for equipment.

Plan of a residential building 8x10

The layout of a residential building with a spot size of 8x10 will be slightly different from the suburban building. The living room ceases to be the dominant premise in the house, the emphasis is shifted to dividing the entire area into residential and utility zones, as well as arranging personal space for each family member.

Layout Features

A detached house, unlike an apartment, has its own characteristics. This also applies to the general provisions that must be taken into account during construction, and the zoning of the premises.

General principles:

You can’t immediately get into a warm room from the street. This will increase heating costs. And in the cold season, the invading cold air when opening the door will create inconvenience. To prevent this from happening, you need to make a vestibule. And it is better if it will be part of the main house, and not attached as a separate room. If you plan to allocate part of the space for a covered porch, then a vestibule is not required.

Living room should occupy a central place. Often it is combined with the kitchen to increase the space. Then the zoning of the room will come to the fore.
Each family member must have a separate bed. If this is a country house, then you can divide the bedrooms into adults and children (separately for boys and separately for girls).

For the size of the house 8x10 square meters. m just one bathroom and a bathroom. Combined or separate, they will depend on your desire. An alternative to a bathtub is a shower cabin, which will save space. If the housing is supposed to be two-story, then on the second tier, such a room is also necessary.

Zoning

First you need to decide where in the site your accommodation will be located. The layout and the more successful arrangement of the windows and the entrance will depend on this. It is better when the windows in the bedroom are facing east, in the living room to the south, and in the kitchen to the west.

Next, consider how many people the plan should be designed for. Based on this, the specialist will calculate the required number of bedrooms. Do not forget about the guest bedroom, if you often have relatives and friends staying late at night. At your request, the architect can design a building with isolated rooms or with a minimum of partitions. The latter will allow you to increase the space and give it a certain lightness and freedom. This is especially true if you plan to use the room as a country house.

An important issue will be the number of storeys of the house. More often it is a one-story, two-story building. You can consider the option with a socle or attic.

Layout of the house 6x9

The layout of a single-storey 6 × 9 house provides tremendous freedom in engineering and design solutions.

A simple plan of a one-story house 6 × 9

In some cases, the plan provides for the attic of the second floor, so that the useful area of the building can be slightly increased. Typically, such projects include terraces and verandas.

Layout of the house 9x9

The layout of the one-story 9x9 house is already intended for a very extensive structure, in which not a single person, but the whole family can freely sit. As a rule, such structures have several residential premises and several utility rooms. Due to the fact that the existing space is very significant, the designer has many opportunities for the implementation of certain ideas.

Plan of a one-story house 9 × 9 Back to the Table of Contents

The layout of the house 10x10

The layout of a one-story house 10x10, which is ideal for several people, involves long construction work. Such houses have several rooms, which are planned with maximum convenience for the people living in them. In addition, these structures delight with space, increased due to the length of the walls.

Plan of a house from a bar 10 × 10 Back to the Table of Contents

Layout of the house 10x12

The layout of a one-story house 10x12 allows you to get a building with a large area and dimensions that are close to square. Using the available space can be made as useful and rational as possible, if you equip the basement and the attic.

Projects with similar dimensions are ideal for construction both within the city and beyond. For greater convenience of living people, planning should be with great care. As a rule, on the ground floor they have a kitchen, a bathroom and a toilet, an entrance hall, a living room and a relaxation room.

Plan of a wooden house 10 × 12

The second floor (if you still decide to prefer a multi-storey version of the house) is used for residential premises, which is very convenient for permanent residence. If the plan implies the presence of a basement, then it can accommodate workshops, a garage and a recreation area.

Layout of the house 12x12

The layout of a one-story house 12x12 implies the presence of a garage, utility rooms, lounges and other rooms, the placement of which is possible with large spacious areas. The construction of such cottages is quite expensive, but at the same time the most profitable from the point of view of operation compared to other options.

Interior decoration

Comfortable living depends on the location of the house on the site, the location of communication networks, thoughtful layout and interior decoration. Walls, ceiling and floor are directly dependent on the material of the house. In low-rise construction, various materials are used: wood, brick, foam blocks, stone. And each has its pros and cons.

In suburban construction, most often they prefer a beam. The wooden house is cost effective and environmentally friendly for future residents. An important factor is also a long service life, and modern wood processing technologies make life in such a house more comfortable.

The most economical are cottages from gas blocks. And cinder blocks allow you to build a house in a short time and at low cost. Brick, on the other hand, is a kind of classic that does not require special ideas.

When working on arranging a private home, it is important to remember a few rules:

Rooms and premises must be connected by common networks. For example, a kitchen and a bathroom are best located next door. This will reduce the cost of engineering and communications networks and avoid additional costs.
The layout of the house and the arrangement of rooms and premises directly depends on the cardinal points. Living room windows should face south or east. And the living room and the nursery are on the south side. On the north side, it is better to design a blank wall or utility non-residential premises with small windows. Such placement of living quarters favorably affects the microclimate and natural ventilation in the house.
Windows with access to a covered terrace or a warm balcony are more reasonable to make French with glazing to the floor. This will fill the room with natural light and air.
In a one-story summer house, you can use an electric boiler with a small capacity, a warm floor and a fireplace in the largest room as an integrated heating system.
Wind flows should be directed into the roof slopes to reduce the load on the structure in case of strong gusts. And it is advisable to equip canopies and planes to protect the walls from the wind and heavy rainfall.

Layout options

It is necessary to consider the most successful layout options, depending on the chosen number of storeys of the structure. After all, the more tiers, the larger the area of the room and the easier it is to arrange all the necessary rooms in the house.

One-story buildings

In ancient times, one-story private houses were very popular, which slept in the early 90s of the twentieth century. At the moment, there has been a tendency to increase demand for single-storey models. This is due to the efficiency and comfort of such buildings.

Consider one of the best options for planning the design size of 8 to 10 square meters. m:

First you need to select all the living areas: bedroom, living room, kitchen, dining room. It is necessary to work out the sizes of all rooms, and the remaining area should be divided into additional zones: boiler room, hall, bathroom and bathroom.
The specified model is designed for one bedroom, but, if necessary, you can reduce the size of the hall and boiler room, and "pick up" part of the living room for the second sleeping area. In this case, it will be appropriate to connect the living room with the kitchen. This will give the room additional freedom, and the design will look more modern.

A garage can be added to the house. One wall of the house will serve as the wall of the garage. Therefore, the cost of its construction will decrease. In the room where the car stands, you can store other vehicles, whether it be a bicycle or a pram. For greater comfort, it is better to exit to the garage directly from the house. Then there will be no need to go around the house to get into it.
All utility rooms can be moved to the basement. This will increase the useful area for living. Also in the basement you can place a pool, a relaxation room with billiards, a dressing room or a playroom for children. And on the residential floor there will be an opportunity to create additional sleeping areas for all family members.

The following advantages of single-storey models can be noted:

Compactness. For 1-story buildings of 8x10 square meters. m less space is needed than for two-story buildings of the same size. This will save a precious place on a small plot of land.
Functionality with proper design will remain at a high level.
Lower costs for the construction and maintenance of the house. You will need much less construction materials for the construction, and subsequently you can significantly save on utility bills.
Modern designers offer many unusual design options for this kind of housing.
Save time on construction. The construction of single-story buildings requires much less time than the construction of more floors. This is especially true for families who do not have other housing or who are crowded in "odnushki".

The disadvantages include a relatively small number of rooms, so a one-story building of 8 to 10 square meters. m is suitable for a small family.

Watch the video on how to implement a one-story house project.

House Features

8x10 houses can be built on one or two floors. The second option takes exactly the same area on the site, but much more capacious. An intermediate option is a house with an attic, the arrangement of which will be much cheaper than the construction of an additional floor. When choosing a planning option, you need to take into account the number of future residents and determine the room for each of them.

Advantages and disadvantages of 8 by 10 houses

The main advantage of such houses is their versatility. Compact buildings successfully fit into a suburban area. No less organically they will look in an urban environment, where every cm of the square plays a huge role.

Among the advantages of erecting a similar structure can be distinguished:

low construction costs - equipment of an expensive foundation is not required, the cost of wages for workers and the purchase of materials are relatively small,
high speed of construction - a very significant nuance for families forced to rent housing,
the opportunity to save on utility bills, due to the relatively small area.

The disadvantages include the same compact dimensions, which do not make it possible to create several spacious rooms for each member of a large family. Such houses are suitable for families of 3-4 people.

What to consider when designing a 8 by 10 house

When drafting a 8x10 house project, it is very important to take into account all the nuances in order to ultimately get comfortable full-fledged housing. To do this, you need to properly organize the space:

divide it into day and night zones,
correctly place the stairs. To save space, it can be placed in a corner or even taken out,
Provide the ability to quickly transform the space with the help of blind sliding partitions. With their help, you can separate the living room from the sleeping area or children's corner in a second.
equip the basement. In the basement you can place a boiler room, a warehouse for blanks, a shower, laundry. This will not load residential floors.

Location of the house on the plot

At the next stage, you need to determine the location of the house in the acquired territory. When choosing a location, you need to focus on:

plot shape. On an elongated, rectangular space, it is better to build a house along the long side. If the plot is trapezoidal, it is more convenient to put the house on the facade to a longer face. On a triangular version, the house can repeat broken boundaries, as an option, the structure can have an l-shaped shape,
established requirements - the house should not occupy more than 30% of the plot area, the minimum distance to the fence should be at least 3 m.

Foundation selection

For a 8x10 house, a strip foundation is perfect. It is made of concrete tapes recessed into the ground. It is they that bear the load from the bearing walls and columns, if any, are present in the structure. Support for tapes are foundation plates. They act as distributing pillows, which allow you to distribute the load over a larger area of soil and install without special preparations.

Such a foundation is suitable for one- and two-story buildings, equipped with a basement or not, with load-bearing walls made of brick, wood or SIP panels. Tape construction can be made directly at the construction site. For concrete pouring, the formwork is pre-mounted. Another option is a prefabricated building made of reinforced concrete blocks. For their installation, a construction crane is required.

Dimensions and number of windows

Correct natural lighting depends not only on the orientation of the windows relative to the cardinal points, but also on their number, size and location. According to existing standards in the premises for living - in the kitchen, living room, bedroom, glazing should occupy an area equal to an eighth of the floor. It is better to provide more windows to achieve uniform insolation.

Distribution of area for rooms and their location

The layout of the rooms is carried out at the stage of developing the foundation project, taking into account future load-bearing and dividing partitions. The volume of clean air for a comfortable stay should be at least 25 cubic meters. The dimensions of future rooms should be calculated in accordance with this requirement.

With a ceiling height of 3 m, the area of the room should be at least 9 square meters. m. Also, during the distribution of space, it is necessary to take into account the degree of intensity and duration of natural light. Another requirement is the possibility of unobstructed ventilation and ventilation of the premises.

What to build from: choice of construction material

The main investments in the construction of the house are materials for the walls. Their choice must be approached as responsibly as possible, so that you do not subsequently have to reap the fruits of your carelessness, and not get to even greater expenses.

What you need to consider when choosing materials for the construction of walls?

The ability to insulate. Cold walls will lead to increased heating costs in the winter. You can correct this moment with the help of heaters. In most regions of our country, additional protection of walls against freezing is required, regardless of the heat-insulating properties of the material.
The volume of labor for the construction of walls. It can be reduced by choosing large blocks or panels as the main material. Frame houses are the champs in assembly speed. Installation of such walls takes 3-4 times less time and effort.
Cost. When choosing a lightweight material, the cost of the foundation is automatically reduced. In this case, it is not necessary to choose a powerful and expensive base option.
Finishing costs. Modern materials with smooth surfaces do not require expensive finishes, so this cost item can be reduced.

In order to understand - what materials should be chosen for the construction of walls, consider their main characteristics, identify the advantages and disadvantages.

Foam concrete

Blocks made of foam concrete and aerated concrete perfectly keep heat. A single-layer wall built of elements 30–40 cm thick has the same heat-insulating properties as a multilayer analogue of brick. Similar characteristics are achieved due to the porous structure of the material. Foam concrete is resistant to changes in humidity and temperature, and allows you to maintain a microclimate that is comfortable for living in the room. Such walls will not rot and collapse - the material has no limitations on the life of the product.

This material is excellent in transportation and installation. It can be cut with an ordinary hacksaw. Due to the impressive dimensions of the foam blocks, you can save a lot on the masonry mortar. Smooth sections of elements in combination with special glue allow thin-masonry masonry. This further enhances the thermal insulation properties of the foam concrete walls. As a result, fairly smooth walls are obtained, thanks to which you can save a lot on finishing materials.

The cost of transporting light gas blocks compared to brick is significantly lower, as well as the wages of masons, since labor costs are reduced, and the laying speed increases by 9 times.

Foam concrete does not burn and has high compressive strengths. It consists exclusively of natural ingredients, so it is environmentally friendly. The material is resistant to frost and has a high level of vapor permeability.

The beam is a processed log, ready for installation. Another variant of the material is elements glued from individual lamellas. The beam may have a square, rectangular or semicircular section. Profiled products are equipped with grooves and protrusions, due to which the joints are more durable and reliable. Oblique sections are designed to drain excess water. If desired, a house from a bar can be built with your own hands.

High environmental friendliness.
Democratic cost.
Excellent thermal conductivity.
Durability.
Aesthetics - the walls of the timber look great and without decoration.
Lightweight structures do not require an expensive foundation.

Wall shrinkage can last several years.
Combustibility
Infection with fungus and bark beetles.
Cracks may occur during house operation.

Some disadvantages can be mitigated by treating the walls with special means that will protect against fire and pests, and will help to maintain the optimum level of humidity and temperature in the room.

Frame-panel house or SIP panel

Frame technology allows you to build a house in just a few weeks. The speed of assembly and the low cost of such buildings makes them give preference to other possible options.

Frame-panel houses are assembled from special panels. They are a multilayer material of two layers of OSB, between which a heater is placed - expanded polystyrene. The small mass of SIP-panels allows you to erect buildings in several floors without mounting load-bearing reinforcing structures.

The material has enhanced thermal insulation properties. A 100 mm layer of expanded polystyrene provides better resistance to heat loss than brick walls with a thickness of 2 m. To achieve such characteristics, the walls of houses made of logs or foam concrete should have a thickness of 50-60 cm.

The advantages of SIP panels include:

light weight - the mass of a square meter of a structural shield does not even reach 20 kg,
unsurpassed installation speed - it will take no more than 20-25 days to build a house with an attic,
excellent heat efficiency - for the installation of a warm structure for most regions of Russia, a standard panel thickness of 17 cm is sufficient,
improved noise insulation - materials of the shield “pie” have enhanced abilities to protect against outside street noise,
all-weather season - installation of houses from SIP panels can be done at any time of the year,
surprisingly simple assembly technology - two pairs of free hands will be enough during construction.

Frame-shield structures also have disadvantages, among which:

excessive tightness - the walls absolutely do not let air through, so you have to equip forced ventilation systems,
the constituent materials and adhesives are difficult to attribute to environmental,
fire hazard.

Brick

Brick is one of the most common materials for building houses. It allows you to build buildings with walls of various thicknesses. The material not only looks spectacular in combination with roofing materials, but also has a host of other advantages.

Easy installation - no need to use special equipment. It is easy to lay ventilation passages in the brick and provide passageways for utilities.
Fire safety - not combustible.
High resistance to rainfall and fungus formation.
Good soundproofing ability.
High thermal insulation characteristics with the correct calculation of wall thickness and selection in accordance with this indicator of the thickness and type of insulation.

The disadvantages of masonry are expressed in:

the need for mandatory insulation and decoration on the outside and inside,
the fact that the brick is not suitable for seasonal buildings - country houses. The material has the ability to accumulate moisture, which freezes in winter. Several freeze-thaw cycles can lead to destruction of the material,
heavy weight, because of which the installation of a strip foundation to the depth of freezing of the soil becomes mandatory.

Storeys and house configuration

There are many options for designing 8x10 houses. It can be a one-story, two-story building or a house with an attic. It may provide for an area for placing a garage, a basement, the arrangement of which will certainly entail an increase in the expenditure item, but will provide comfort when operating the house. Houses with open terraces or glazed verandas, with patio areas and other interesting outbuildings look incredibly spectacular.

Two-storey house

Before starting construction, it is worthwhile to figure out what pros and cons are characteristic of two-story buildings.

Allowing without reducing the amount of living space to significantly save the space of the site, which is useful for arranging other necessary areas - for recreation, covered parking, playground, garden.
The size of the roof of a one-story house of the same area will be significantly larger. Consequently, much more materials will be needed for its installation, and this will lead to a significant rise in price.
Externally, two-story houses look much more spectacular. This is one of the main criteria that determines their high popularity.

Cons of two-story houses:

The foundation is subjected to heavy loads, so you have to use expensive concrete grades.
To carry out facing works, it is necessary to erect forests, the rental of which will also lead to a rise in the cost of the project.
It will be necessary to install floors between floors and build a staircase.
It is more difficult to equip utilities and effectively heat the house in winter.

If the main thing for you is saving space, choose a two-story house. If you want to reduce the budget for the construction - a one-story building - this is your option.

Cottage

One-story buildings also have their advantages and disadvantages. Let's consider them in more detail.

In one-story houses there are no stairs, which ensures convenience and safety when moving. This is especially important for families with children and the elderly.
Presentable appearance - the structure looks very solid.
Construction takes much less time and labor than the construction of a two-story house in the same area.
A complex, expensive foundation is not required, as the load of the supporting structure is minimized.
Conducting construction is possible on any type of soil, not excluding water and even unstable.
To operate such a building is much less expensive. This is due to the fact that the heating is evenly distributed over all areas of the house, and a smaller number of windows reduces the inevitable heat loss.
There are no seasonal restrictions for home repairs.
Construction does not require the construction of forests, which takes a significant share of the costs in the construction of additional floors.

Among the shortcomings of a single-storey 8x10 house are the following:

small total area compared to a two-story building,
it is required to select a terrain with the most even relief for construction,
the need for laying under the flooring a massive layer of heat-insulating material,
If necessary, adding additional rooms will not be easy. In this case, you can create a living space by remodeling the attic or by attic. But with such manipulations, the initial architectural design is often violated and the appearance of the building deteriorates.

House with an attic

Attic type houses are very popular. And this is not surprising. Instead of an idle attic, a cozy living area appears, the arrangement of which will require a minimum of costs. It can be used as a bedroom, nursery, games room, billiard room, library. Sometimes in this space there is a cozy themed living room - a room decorated with hunting trophies and weapons. There are many options and the choice depends on the preferences of the owners.

Projects with an attic will require the installation of heat and sound insulating materials, the installation of non-standard windows, the refinement of the ventilation and heating system.

House with annex

House 8x10 can be equipped with an extension in the form of a porch, terrace, porch or garage. This will allow, without reducing the living space, to increase the functionality of the structure and harmoniously fit it into the surrounding landscape. Annexes are a buffer zone, and you should think about their purpose at the design stage. The easiest option is a porch with a canopy, on which you can hide from the rain and burning sun.

Another type of extension is terraces and verandas. These are similar options and are often confused.And yet, most often, a terrace is called an open area adjacent to the house with a trellised or balustrade fence and a temporary or stationary canopy. The veranda is a continuation of the building. This structure joins the house from one or several sides at once - it is built into a corner, l-shaped models go around the house.

The patio area is a site paved with stone or paved with paving tiles. Its fence is often made of wooden grilles or forged elements. The entrance to the site from the garden is usually made out with an arch, “reinforced” by thuja or larch trees.

Instead of paving, in this area you can use flooring from boards, on which it is very nice to walk barefoot on a warm sunny day. This area is complemented by garden furniture, a barbecue area and a removable or permanent canopy.

Another significant extension could be a garage or covered parking. These are necessary elements for a country house, the path to which must be overcome by car.

How to position the stairs

When choosing the area for installing the stairs, it is necessary to rely on the design features of the building. It is most appropriate to place it in a wide hall. There, it will become the central element of design - the hallmark of the house. It is easier to provide for the arrangement of a wide opening to the second floor, which ensures comfortable movement from one level to another.

The stairs can be installed along the wall. In this case, it is better to move it to a corner. In the absence of large openings, you can significantly reduce the size of the structure or even limit yourself to running steps.

What determines the choice of interior style

For the design of a country house, absolutely any style is suitable - it all depends on the preferences of the owner. Fans of luxury and presentability will choose the classic direction, adherents of minimalism - modern stylistics, connoisseurs of natural materials - eco style, ethnic motifs will appeal to admirers of traditions of various nations.

The main condition is that the interior should support the idea of decorating the facade and landscaping the site.

Ways to decorate the facade of the house

Home decoration can be your pride. There are many ways to finish it cheaply and tastefully.

Wooden architecture. The best decoration for a wooden house is carved elements: platbands, shutters, slatted blinds. With the help of painted cladding panels and accent tinted battens, you can design a house in the style of fachwerk. Another option for facing material is lining.
Fiber concrete. New and quite expensive stuff. High cost is the result of a laborious production process. Finishing elements are molded in molds. The main advantage of the material is high strength. However, it also has drawbacks - high moisture absorption, high weight, which is why parts often fall off.
Siding. Vinyl or metal material. It allows you to quickly and without special knowledge to provide the house with a durable, effective and easily washable coating.
Clinker. It is made of glass-magnesium sheets and resembles a brick. It goes well with stucco and forged products.
Basement panels - polymer coating with various textures. May be an imitation of wood or natural stone.
Plaster. It looks very impressive. Requires regular updates.
Stucco molding. To decorate the facade, only a gypsum variety is suitable.

What mistakes to avoid when designing

When designing a project, you need to take into account many nuances:

Do not forget to plan elements that increase the comfort of the building by several levels - dressing rooms, a sauna, a sink in the garage.
Building a house on a standard project will cost much less.
Do not hope that remaking an old house will cost less than building a new one. This is exactly the opposite.
When deciding on the number of storeys of your home, consider the number of family members and their individual characteristics.
Do not forget to equip the second exit from the garage to the building. Otherwise, having to get out of the car, you have to go outside again.
Be sure to include a room for a small boiler room in the house plan. As an extension, this element does not look too aesthetically pleasing.

You can find examples of one-and two-story 8x10 houses with a good layout in our photo gallery.